View TA78L05_7432788.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

TA78L05,06,07,08,09,10, 12,15,18,20,24f 2009-09-30 1 toshiba bipolar linear integrat ed cir cuit silicon monolithic TA78L05f,ta78l06f,ta78l07f,ta78l08f,ta78l09f,ta78l10f, ta78l12f,ta78l15f,ta78l 18f,ta78l20f,ta78l24f 5 v, 6 v, 7 v, 8 v, 9 v, 10 v, 12 v, 15 v, 18 v, 20 v, 24 v 3-terminal positive voltage regulators features z best suited to power supply for ttl/cmos. z no external parts needed. z built-in overheating protection. z built-in overcurrent protection. z max output current of 150ma. (t j = 25c). z packaged in pw-mini (sot-89). pin assignment out 1 2 in gnd (case) marking side 3 marking part no. (or abbreviation code) part no. ae TA78L05f be ta78l06f ke ta78l07f ce ta78l08f de ta78l09f ee ta78l10f fe ta78l12f ge ta78l15f he ta78l18f ie ta78l20f * 1 je ta78l24f note: a line beside a lot no. identifies the indication of product labels. without a line: [[pb]]/includes > mcv with a line: [[g]]/rohs compat ible or [[g]]/rohs [[pb]] please contact your toshiba sales r epresentative for details as to environmental matters such as the rohs compatibility of product. the rohs is t he directive 2002/95/ec of the europe an parliament and of the council of 27 january 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. the product(s) in this document (?product?) contain f unctions intended to protect the product from temporary small overloads such as minor short-term overcurrent or overheating. the prot ective functions do not necessarily protect product under all circumstances. when incorporating product into your system, please design the system (1) to avoid such overloads upon t he product, and (2) to shut down or otherwise relieve the product of such overload conditions immediately upon occurrence. for details, please refer to the notes appearing below in this document and other documents referenced in this document. weight: 0.05 g (typ.) a e part no. (or abbreviation code) * 1 lot no. (weekly code) note
TA78L05,06,07,08,09,10, 12,15,18,20,24f 2009-09-30 2 equivalent circuit type marking TA78L05f ae ta78l06f be ta78l07f ke ta78l08f ce ta78l09f de ta78l10f ee ta78l12f fe ta78l15f ge ta78l18f he ta78l20f ie ta78l24f je absolute maximum ratings (ta = 25c) characteristics symbol rating unit TA78L05f ta78l06f ta78l07f ta78l08f ta78l09f ta78l10f ta78l12f ta78l15f 35 ta78l18f ta78l20f 0input voltage ta78l24f v in 40 v output current i out 0.15 a power dissipation (ta = 25c) p d 500 mw operating temperature t opr ? 30 to 85 c storage temperature t stg ? 55 to 150 c junction temperature t j 150 c thermal resistance r th (j-a) 250 c/w note: using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operat ing temperature/current/voltage, etc. ) are within the absolute maximum ratings and the operating ranges. please design the appropriate reliability upon reviewing the toshiba semiconductor reliability handbook (?handling precautions?/?derating concept and methods?) and individual reliability data (i.e. reliability test report and estimated failure rate, etc).
TA78L05,06,07,08,09,10, 12,15,18,20,24f 2009-09-30 3 TA78L05f electrical characteristics (unless otherwise specified, v in = 10 v, i out = 40 ma, c in = 0.33 f, c out = 0.1 f, 0c t j 125c) characteristics symbol test circuit test condition min typ. max unit output voltage v out 1 t j = 25c 4.75 5.0 5.25 v 7.0 v v in 20 v D 55 150 line regulation regline 1 t j = 25c 8.0 v v in 20 v D 45 100 mv 1.0 ma i out 100 ma D 11 60 load regulation regload 1 t j = 25c 1.0 ma i out 40 ma D 5.0 30 mv 7.0 v v in 20 v, 1.0 ma i out 40 ma 4.65 D 5.35 output voltage v out 1 t j = 25c 1.0 ma i out 70 ma 4.65 D 5.35 v t j = 25c D 3.1 6.0 quiescent current i b 1 t j = 125c D D 5.5 ma 8.0 v v in 20 v D D 1.5 quiescent current change i b 1 t j = 25c 1.0 ma i out 40 ma D D 0.1 ma output noise voltage v no 2 ta = 25c, 10 hz f 100 khz D 40 D v rms long term stability v out / t 1 D D 12 D mv/kh ripple rejection ratio r.r. 3 f = 120 hz, 8.0 v v in 18 v, t j = 25c 41 49 D db dropout voltage v d 1 t j = 25c D 1.7 D v average temperature coefficient of output voltage t cvo 1 i out = 5 ma D ? 0.6 D mv/c
TA78L05,06,07,08,09,10, 12,15,18,20,24f 2009-09-30 4 ta78l06f electrical characteristics (unless otherwise specified, v in = 11 v, i out = 40 ma, c in = 0.33 f, c out = 0.1 f, 0c t j 125c) characteristics symbol test circuit test condition min typ. max unit output voltage v out 1 t j = 25c 5.7 6.0 6.3 v 8.1 v v in 21 v D 50 150 line regulation regline 1 t j = 25c 9.0 v v in 21 v D 45 110 mv 1.0 ma i out 100 ma D 12 70 load regulation regload 1 t j = 25c 1.0 ma i out 40 ma D 5.5 35 mv 8.1 v v in 21 v, 1.0 ma i out 40 ma 5.58 D 6.42 output voltage v out 1 t j = 25c 1.0 ma i out 70 ma 5.58 D 6.42 v t j = 25c D 3.1 6.0 quiescent current i b 1 t j = 125c D D 5.5 ma 9.0 v v in 20 v D D 1.5 quiescent current change i b 1 t j = 25c 1.0 ma i out 40 ma D D 0.1 ma output noise voltage v no 2 ta = 25c, 10 hz f 100 khz D 40 D v rms long term stability v out / t 1 D D 14 D mv/kh ripple rejection ratio r.r. 3 f = 120 hz, 9.0 v v in 19 v, t j = 25c 39 47 D db dropout voltage v d 1 t j = 25c D 1.7 D v average temperature coefficient of output voltage t cvo 1 i out = 5 ma D ? 0.7 D mv/c
TA78L05,06,07,08,09,10, 12,15,18,20,24f 2009-09-30 5 ta78l07f electrical characteristics (unless otherwise specified, v in = 12 v, i out = 40 ma, c in = 0.33 f, c out = 0.1 f, 0c t j 125c) characteristics symbol test circuit test condition min typ. max unit output voltage v out 1 t j = 25c 6.65 7.0 7.35 v 9.2 v v in 22 v D 50 160 line regulation regline 1 t j = 25c 10 v v in 22 v D 45 115 mv 1.0 ma i out 100 ma D 13 75 load regulation regload 1 t j = 25c 1.0 ma i out 40 ma D 6.0 40 mv 9.2 v v in 22 v, 1.0 ma i out 40 ma 6.51 D 7.49 output voltage v out 1 t j = 25c 1.0 ma i out 70 ma 6.51 D 7.49 v t j = 25c D 3.1 6.5 quiescent current i b 1 t j = 125c D D 6.0 ma 10 v v in 22 v D D 1.5 quiescent current change i b 1 t j = 25c 1.0 ma i out 40 ma D D 0.1 ma output noise voltage v no 2 ta = 25c, 10 hz f 100 khz D 50 D v rms long term stability v out / t 1 D D 17 D mv/kh ripple rejection ratio r.r. 3 f = 120 hz, 10 v v in 20 v, t j = 25c 37 46 D db dropout voltage v d 1 t j = 25c D 1.7 D v average temperature coefficient of output voltage t cvo 1 i out = 5 ma D ? 0.75 D mv/c
TA78L05,06,07,08,09,10, 12,15,18,20,24f 2009-09-30 6 ta78l08f electrical characteristics (unless otherwise specified, v in = 14 v, i out = 40 ma, c in = 0.33 f, c out = 0.1 f, 0c t j 125c) characteristics symbol test circuit test condition min typ. max unit output voltage v out 1 t j = 25c 7.6 8.0 8.4 v 10.5 v v in 23 v D 20 175 line regulation regline 1 t j = 25c 11 v v in 23 v D 12 125 mv 1.0 ma i out 100 ma D 15 80 load regulation regload 1 t j = 25c 1.0 ma i out 40 ma D 7.0 40 mv 10.5 v v in 23 v, 1.0 ma i out 40 ma 7.44 D 8.56 output voltage v out 1 t j = 25c 1.0 ma i out 70 ma 7.44 D 8.56 v t j = 25c D 3.1 6.5 quiescent current i b 1 t j = 125c D D 6.0 ma 11 v v in 23 v D D 1.5 quiescent current change i b 1 t j = 25c 1.0 ma i out 40 ma D D 0.1 ma output noise voltage v no 2 ta = 25c, 10 hz f 100 khz D 60 D v rms long term stability v out / t 1 D D 20 D mv/kh ripple rejection ratio r.r. 3 f = 120 hz, 12 v v in 23 v, t j = 25c 37 45 D db dropout voltage v d 1 t j = 25c D 1.7 D v average temperature coefficient of output voltage t cvo 1 i out = 5 ma D ? 0.8 D mv/c
TA78L05,06,07,08,09,10, 12,15,18,20,24f 2009-09-30 7 ta78l09f electrical characteristics (unless otherwise specified, v in = 15 v, i out = 40 ma, c in = 0.33 f, c out = 0.1 f, 0c t j 125c) characteristics symbol test circuit test condition min typ. max unit output voltage v out 1 t j = 25c 8.55 9.0 9.45 v 11.4 v v in 24 v D 80 200 line regulation regline 1 t j = 25c 12 v v in 24 v D 20 160 mv 1.0 ma i out 100 ma D 17 90 load regulation regload 1 t j = 25c 1.0 ma i out 40 ma D 8.0 45 mv 11.4 v v in 24 v, 1.0 ma i out 40 ma 8.37 D 9.63 output voltage v out 1 t j = 25c 1.0 ma i out 70 ma 8.37 D 9.63 v t j = 25c D 3.2 6.5 quiescent current i b 1 t j = 125c D D 6.0 ma 12 v v in 24 v D D 1.5 quiescent current change i b 1 t j = 25c 1.0 ma i out 40 ma D D 0.1 ma output noise voltage v no 2 ta = 25c, 10 hz f 100 khz D 65 D v rms long term stability v out / t 1 D D 21 D mv/kh ripple rejection ratio r.r. 3 f = 120 hz, 12 v v in 24 v, t j = 25c 36 44 D db dropout voltage v d 1 t j = 25c D 1.7 D v average temperature coefficient of output voltage t cvo 1 i out = 5 ma D ? 0.85 D mv/c
TA78L05,06,07,08,09,10, 12,15,18,20,24f 2009-09-30 8 ta78l10f electrical characteristics (unless otherwise specified, v in = 16 v, i out = 40 ma, c in = 0.33 f, c out = 0.1 f, 0c t j 125c) characteristics symbol test circuit test condition min typ. max unit output voltage v out 1 t j = 25c 9.5 10 10.5 v 12.5 v v in 25 v D 80 230 line regulation regline 1 t j = 25c 13 v v in 25 v D 30 170 mv 1.0 ma i out 100 ma D 18 90 load regulation regload 1 t j = 25c 1.0 ma i out 40 ma D 8.5 45 mv 12.5 v v in 25 v, 1.0 ma i out 40 ma 9.3 D 10.7 output voltage v out 1 t j = 25c 1.0 ma i out 70 ma 9.3 D 10.7 v t j = 25c D 3.2 6.5 quiescent current i b 1 t j = 125c D D 6.0 ma 13 v v in 25 v D D 1.5 quiescent current change i b 1 t j = 25c 1.0 ma i out 40 ma D D 0.1 ma output noise voltage v no 2 ta = 25c, 10 hz f 100 khz D 70 D v rms long term stability v out / t 1 D D 22 D mv/kh ripple rejection ratio r.r. 3 f = 120 hz, 13 v v in 24 v, t j = 25c 36 43 D db dropout voltage v d 1 t j = 25c D 1.7 D v average temperature coefficient of output voltage t cvo 1 i out = 5 ma D ? 0.9 D mv/c
TA78L05,06,07,08,09,10, 12,15,18,20,24f 2009-09-30 9 ta78l12f electrical characteristics (unless otherwise specified, v in = 19 v, i out = 40 ma, c in = 0.33 f, c out = 0.1 f, 0c t j 125c) characteristics symbol test circuit test condition min typ. max unit output voltage v out 1 t j = 25c 11.4 12 12.6 v 14.5 v v in 27 v D 120 250 line regulation regline 1 t j = 25c 16 v v in 27 v D 100 200 mv 1.0 ma i out 100 ma D 20 100 load regulation regload 1 t j = 25c 1.0 ma i out 40 ma D 10 50 mv 14.5 v v in 27 v, 1.0 ma i out 40 ma 11.16 D 12.84 output voltage v out 1 t j = 25c 1.0 ma i out 70 ma 11.16 D 12.84 v t j = 25c D 3.2 6.5 quiescent current i b 1 t j = 125c D D 6.0 ma 16 v v in 27 v D D 1.5 quiescent current change i b 1 t j = 25c 1.0 ma i out 40 ma D D 0.1 ma output noise voltage v no 2 ta = 25c, 10 hz f 100 khz D 80 D v rms long term stability v out / t 1 D D 24 D mv/kh ripple rejection ratio r.r. 3 f = 120 hz, 15 v v in 25 v, t j = 25c 36 41 D db dropout voltage v d 1 t j = 25c D 1.7 D v average temperature coefficient of output voltage t cvo 1 i out = 5 ma D ? 1.0 D mv/c
TA78L05,06,07,08,09,10, 12,15,18,20,24f 2009-09-30 10 ta78l15f electrical characteristics (unless otherwise specified, v in = 23 v, i out = 40 ma, c in = 0.33 f, c out = 0.1 f, 0c t j 125c) characteristics symbol test circuit test condition min typ. max unit output voltage v out 1 t j = 25c 14.25 15 15.75 v 17.5 v v in 30 v D 130 300 line regulation regline 1 t j = 25c 20 v v in 30 v D 110 250 mv 1.0 ma i out 100 ma D 25 150 load regulation regload 1 t j = 25c 1.0 ma i out 40 ma D 12 75 mv 17.5 v v in 30 v, 1.0 ma i out 40 ma 13.95 D 16.05 output voltage v out 1 t j = 25c 1.0 ma i out 70 ma 13.95 D 16.05 v t j = 25c D 3.3 6.5 quiescent current i b 1 t j = 125c D D 6.0 ma 20 v v in 30 v D D 1.5 quiescent current change i b 1 t j = 25c 1.0 ma i out 40 ma D D 0.1 ma output noise voltage v no 2 ta = 25c, 10 hz f 100 khz D 90 D v rms long term stability v out / t 1 D D 30 D mv/kh ripple rejection ratio r.r. 3 f = 120 hz, 18.5 v v in 28.5 v, t j = 25c 34 40 D db dropout voltage v d 1 t j = 25c D 1.7 D v average temperature coefficient of output voltage t cvo 1 i out = 5 ma D ? 1.3 D mv/c
TA78L05,06,07,08,09,10, 12,15,18,20,24f 2009-09-30 11 ta78l18f electrical characteristics (unless otherwise specified, v in = 27 v, i out = 40 ma, c in = 0.33 f, c out = 0.1 f, 0c t j 125c) characteristics symbol test circuit test condition min typ. max unit output voltage v out 1 t j = 25c 17.1 18 18.9 v 21.4 v v in 33 v D 32 325 line regulation regline 1 t j = 25c 22 v v in 33 v D 27 275 mv 1.0 ma i out 100 ma D 30 170 load regulation regload 1 t j = 25c 1.0 ma i out 40 ma D 15 75 mv 21.4 v v in 33 v, 1.0 ma i out 40 ma 16.74 D 19.26 output voltage v out 1 t j = 25c 1.0 ma i out 70 ma 16.74 D 19.26 v t j = 25c D 3.3 6.5 quiescent current i b 1 t j = 125c D D 6.0 ma 22 v v in 33 v D D 1.5 quiescent current change i b 1 t j = 25c 1.0 ma i out 40 ma D D 0.1 ma output noise voltage v no 2 ta = 25c, 10 hz f 100 khz D 150 D v rms long term stability v out / t 1 D D 45 D mv/kh ripple rejection ratio r.r. 3 f = 120 hz, 23 v v in 33 v, t j = 25c 32 38 D db dropout voltage v d 1 t j = 25c D 1.7 D v average temperature coefficient of output voltage t cvo 1 i out = 5 ma D ? 1.5 D mv/c
TA78L05,06,07,08,09,10, 12,15,18,20,24f 2009-09-30 12 ta78l20f electrical characteristics (unless otherwise specified, v in = 29 v, i out = 40 ma, c in = 0.33 f, c out = 0.1 f, 0c t j 125c) characteristics symbol test circuit test condition min typ. max unit output voltage v out 1 t j = 25c 19.0 20 21.0 v 23.5 v v in 35 v D 33 330 line regulation regline 1 t j = 25c 24 v v in 35 v D 28 285 mv 1.0 ma i out 100 ma D 33 180 load regulation regload 1 t j = 25c 1.0 ma i out 40 ma D 17 90 mv 23.5 v v in 35 v, 1.0 ma i out 40 ma 18.6 D 21.4 output voltage v out 1 t j = 25c 1.0 ma i out 70 ma 18.6 D 21.4 v t j = 25c D 3.3 6.5 quiescent current i b 1 t j = 125c D D 6.0 ma 24 v v in 35 v D D 1.5 quiescent current change i b 1 t j = 25c 1.0 ma i out 40 ma D D 0.1 ma output noise voltage v no 2 ta = 25c, 10 hz f 100 khz D 170 D v rms long term stability v out / t 1 D D 49 D mv/kh ripple rejection ratio r.r. 3 f = 120 hz, 25 v v in 35 v, t j = 25c 31 37 D db dropout voltage v d 1 t j = 25c D 1.7 D v average temperature coefficient of output voltage t cvo 1 i out = 5 ma D ? 1.7 D mv/c
TA78L05,06,07,08,09,10, 12,15,18,20,24f 2009-09-30 13 ta78l24f electrical characteristics (unless otherwise specified, v in = 33 v, i out = 40 ma, c in = 0.33 f, c out = 0.1 f, 0c t j 125c) characteristics symbol test circuit test condition min typ. max unit output voltage v out 1 t j = 25c 22.8 24 25.2 v 27.5 v v in 38 v D 35 350 line regulation regline 1 t j = 25c 28 v v in 38 v D 30 300 mv 1.0 ma i out 100 ma D 40 200 load regulation regload 1 t j = 25c 1.0 ma i out 40 ma D 20 100 mv 27.5 v v in 38 v, 1.0 ma i out 40 ma 22.32 D 25.68 output voltage v out 1 t j = 25c 1.0 ma i out 70 ma 22.32 D 25.68 v t j = 25c D 3.5 6.5 quiescent current i b 1 t j = 125c D D 6.0 ma 28 v v in 38 v D D 1.5 quiescent current change i b 1 t j = 25c 1.0 ma i out 40 ma D D 0.1 ma output noise voltage v no 2 ta = 25c, 10 hz f 100 khz D 200 D v rms long term stability v out / t 1 D D 56 D mv/kh ripple rejection ratio r.r. 3 f = 120 hz, 29 v v in 39 v, t j = 25c 31 35 D db dropout voltage v d 1 t j = 25c D 1.7 D v average temperature coefficient of output voltage t cvo 1 i out = 5 ma D ? 2.0 D mv/c
TA78L05,06,07,08,09,10, 12,15,18,20,24f 2009-09-30 14 test circuit 1 / standard application test circuit 2 v no test circuit 3 r.r.
TA78L05,06,07,08,09,10, 12,15,18,20,24f 2009-09-30 15
TA78L05,06,07,08,09,10, 12,15,18,20,24f 2009-09-30 16
TA78L05,06,07,08,09,10, 12,15,18,20,24f 2009-09-30 17 usage precautions destruction of the ic may occur if high voltage in excess of the ic output volt age (typ. value) is applied to the ic output terminal. where this possibility exists, connect a zener diode between the output terminal and gnd to prevent any application of excessive voltage. ? low voltage do not apply voltage to the product that is lower th an the minimum operating vo ltage, or the product?s protective functions will not op erate properly and the product may be permanently damaged. ? overcurrent protection the overcurrent protection circuits in the product are designed to temporarily protect product from minor overcurrent of brief duration. when the overcurrent protective func tion in the product activates, immediately cease application of overcurrent to product. improper usage of product, such as application of current to product exceedin g the absolute maximum ratings, could ca use the overcurrent protection circuit not to operate properly an d/or damage product permanently even be fore the protection circuit starts to operate. ? overheating protection the thermal shutdown circuits in th e product are designed to tempor arily protect product from minor overheating of brief duration. when the overheating protective func tion in the product activates, immediately correct the overheating situation. improper usage of product, such as the application of heat to product exceeding the absolute maximum ratings, co uld cause the overheating protection circuit not to operate properly and/or damage prod uct permanently even before the prot ection circuit starts to operate.
TA78L05,06,07,08,09,10, 12,15,18,20,24f 2009-09-30 18 package dimensions
TA78L05,06,07,08,09,10, 12,15,18,20,24f 2009-09-30 19 restrictions on product use ? toshiba corporation, and its subsidiaries and affiliates (collect ively ?toshiba?), reserve the right to make changes to the in formation in this document, and related hardware, software a nd systems (collectively ?product?) without notice. ? this document and any information herein may not be reproduc ed without prior written permission from toshiba. even with toshiba?s written permission, reproduc tion is permissible only if reproducti on is without alteration/omission. ? though toshiba works continually to improve product?s quality and reliability, product can malfunction or fail. customers are responsible for complying with safety standards and for prov iding adequate designs and safeguards for their hardware, software and systems which minimize risk and avoid situations in which a ma lfunction or failure of product could cause loss of human life, b odily injury or damage to property, including data loss or corruption. before customers use the product, create designs including the product, or incorporate the product into their own applications, cu stomers must also refer to and comply with (a) the latest versions of all relevant toshiba information, including without limitation, this document, the specifications, the data sheets and application notes for product and the precautions and condi tions set forth in the ?toshiba semiconductor reliability handbook? and (b) the instructions for the application with which the product will be us ed with or for. customers are solely responsible for all aspe cts of their own product design or applications, including but not limited to (a) determining the appropriateness of the use of this product in such design or applications; (b) eval uating and determining the applicability of any info rmation contained in this document, or in c harts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operatin g parameters for such designs and applications. toshiba assumes no liability for customers? product design or applications. ? product is intended for use in general el ectronics applications (e.g., computers, personal equipment, office equipment, measur ing equipment, industrial robots and home electroni cs appliances) or for specif ic applications as expre ssly stated in this document . product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality a nd/or reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or se rious public impact (?unintended use?). unintended use includes, without limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic s ignaling equipment, equipment used to control combustions or explosions, safety dev ices, elevators and escalato rs, devices related to el ectric power, and equipment used in finance-related fields. do not use product for unintended use unless specifically permitted in thi s document. ? do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy product, whether in whole or in part. ? product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable laws or regulations. ? the information contained herein is pres ented only as guidance for product use. no re sponsibility is assumed by toshiba for an y infringement of patents or any other intellectual property rights of third parties that may result from the use of product. no license to any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise. ? a bsent a written signed agreement, except as provid ed in the relevant terms and conditions of sale for product, and to the maximum extent allowable by law, toshiba (1) assumes no liability whatsoever, including without limitation, indirect, co nsequential, special, or incidental damages or loss, including without limitation, loss of profit s, loss of opportunities, business interruption and loss of data, and (2) disclaims any and all express or implied warranties and conditions related to sale, use of product, or information, including warranties or conditions of merchantability, fitness for a particular purpose, accuracy of information, or noninfringement. ? do not use or otherwise make available product or related so ftware or technology for any military purposes, including without limitation, for the design, development, use, stockpiling or m anufacturing of nuclear, chemical , or biological weapons or missi le technology products (mass destruction w eapons). product and related software and technology may be controlled under the japanese foreign exchange and foreign trade law and the u.s. expor t administration regulations. ex port and re-export of product or related software or technology are strictly prohibited exc ept in compliance with all applicable export laws and regulations. ? please contact your toshiba sales representative for details as to environmental matters such as the rohs compatibility of pro duct. please use product in compliance with all applicable laws and regula tions that regulate the inclusion or use of controlled subs tances, including without limitation, the eu rohs directive. toshiba assumes no liability for damages or losses occurring as a result o f noncompliance with applicable laws and regulations.

▲Up To Search▲

Price & Availability of TA78L05

	To Download TA78L05 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .